User's Manual

previous or next track

4. Press “VOL+” / “VOL-” button on remote control or tap the“+”/ “-” button

on the main unit to raise/lower the volume level.

NOTE:

• The USB port is also designed for charging external devices during any

mode other than USB mode.

Connect and use the speaker (Bluetooth mode)

1. Power on the speaker.

2. Change to Bluetooth mode. Status indicator will blink blue.

3. On your Bluetooth device, turn on Bluetooth and scan for device in its

Bluetooth menu. When “MW-1480” appears on the device list of your

Bluetooth device, select and connect (enter 0000 if pass code is

required).

4. The status indicator will change to solid blue after Bluetooth pairing

established.

Specification

Speaker

Input voltage: 120V～60Hz

USB output: DC 5V 1A

Power Consumption: 48W

Standby power Consumption: ≤0.5W

Transmission distance: up to 30ft (10m)

Working temperature: 0℃-35℃

Bluetooth version: V2.1+EDR

Supported protocol: A2DP, AVRCP

Frequency response: 60Hz-18KHz@-10dB

Signal noise ratio: 50dB

Dimension: 33.10x4.37x2.17in (840x111x55mm)

Weight: 95 oz (2.7Kg)

Remote control

Use battery: 2pcsxAAA

Working current: 8mA

Sleep mode current:

8μA