User's Manual

12
from radio, Buzzer appeared.
3. Press the Alarm Button until alarm hour digit flashes on the display.
Press or Button to adjust the hour, press ALARM to confirm
the hour. The hour digit stops flashing and the minute digit starts to flash.
4. Press or button again to adjust the minute, then press
ALARM button to confirm the minute.
The Nap alarm will be active only for once, In Nap Alarm mode, it can’t
select the week in Nap alarm.
Note:
. If the alarm is activated in Radio, it the alarm will turn on and broadcast
the last channel before turning off the unit and continue playing for 1
hour.
· If the alarm sounds in Buzzer, the buzzer sound will be getting louder and
louder gradually and continue for 10 Minutes
Arming and Disarming Alarm (Turn Alarm Function On and Off)
To arm or disarm the alarm, just slide the AL1 ON/OFF or AL2 ON/OFF
switch to the ON or OFF position to set the Alarm 1 or Alarm 2 on or off
respectively.
If the alarm is armed, the relevant alarm icon will appear on the display.
If the alarm is disarmed, the relevant alarm icon will disappear from the
display.
Resetting the Alarm to Come on the Next Day
When the alarm is activated (waking you), switch the AL1 or AL2 to OFF
position to stop alarm and reset it to come on the following day at the
same time.