User's Manual

SETTING AND USING THE ALARMS

Clock Setup

Setting the Time Manually

1. Press and hold the “TIME” button during power off mode to access time

setup, the hour digit will flash.

2. Press or button to adjust the hour, then press TIME button to

confirm the hour. The hour digit will stop flashing and the minute digit will

start to flash.

3. Press or button again to adjust the minute, then press TIME

button to confirm the minute. The minute digit will stop flashing and the

day of the week icon will start to flash.

4. Press or button again to adjust the day of the week, then

press TIME button to confirm.

Alarm 1 and Alarm 2 Setup

1. Press Alarm Button until “Alarm1 ”icon flashes, then press or

button to select wake to sound source circularly (the Alarm1 icon will

stop flashing, and the relevant alert icon will flash):Radio, Buzzer with

Alarm1 appeared.

2. Press or Button to adjust the hour, press ALARM to

confirm the hour. The hour digit stop flashing and the minute digit start to

flash.

4. Press or button again to adjust the minute, then press

ALARM button to confirm the minute and the day of the week icons start to

flash.

5. Press or button again to set the Alarm frequency (7 days,

weekdays, weekend) , then press ALARM button to confirm the Alarm 1

setting and enter into Alarm 2 setting mode (the Alarm 2 icon flashes)

To set Alarm2 follow above steps

NAP (one time alarm) Setup

1. During power off mode, press the “ALARM” button three times

continuously until the display show flashing “NAP” to access NAP setting

mode.

2. Press or button to select wake to mode circularly (alert icon: