User's Manual
5
5. To ignore an incoming call, simply press and hold the button on the speaker for about 2
seconds, a beep sound will be heard and the call will be ignored .
OPERATING THE SPEAKER IN TF-CARD MODE
u Insert the TF card carefully to the speaker to access TF card mode, the operating mode
indicator will be changed to Purple color. The TF card will start playing automatically in few
seconds.
u Press button to pause or resume playback.
u -Press and hold the “+” or “-” button to raise up/lower the volume level.
u Short Press “+” button to skip to next track or press “-” button to the previous track.
u To remove your TF card, simply pause the playback and gently unplug it from the slot.
Remember to turn off the speaker, too.
OPERATING THE SPEAKER IN AUX-IN MODE
If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect this unit
via bluetooth directly, you can still play it on the speaker via an audio connecting cable.
1. Plug one end of the 3.5mm audio cable (excluded) into the headphone or line out jack on
your player, plug the other end of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Slide the Power ON/OFF switch to ON position to turn on the unit, the operating mode
indicator will light up in Red.
4. The volume level can now be controlled through the main unit. Operate all other functions
on the external device as usual.
Notes:
1). If you're connected to the Line out Jack of your external device, then you only need to adjust
the volume control of this speaker. If you're connected to the Headphone Jack of your external
device, then you may need to adjust both the volume control of your external device and the
volume control of this unit to find the most desirable volume setting.
2) Slide the Power ON/OFF selector to OFF position to turn off the unit when you finish
listening.
Don't forget to switch off the power of your external device as well.
3) During AUX mode, if you plug TF card into the unit, the play mode will automatically change
to TF Card playback mode.
Troubleshooting Guide
Should you experience difficulties in the use of this player, please refer to the following chart.
Fault Cause Solution
No Charging
The USB power
adaptor (not included)
is not plugged into a
wall outlet or the USB
cable (included)is not
plugged into the mini
USB jack on the
bottom of the
MW-1309
Plug the USB power
adaptor (not included) into a
wall outlet and plug the
USB cable (included) into
the mini USB jack on the
MW-1309
Wall outlet is not
functioning.
Plug another device into the
same outlet to confirm the
outlet is working.
Computer USB port is
not function.
Make sure your computer
power is turned on and try
another USB port.