User's Manual

 -Press and hold the “+” or “-” button to raise up/lower the

volume level.

 Short Press “+” button to skip to next track or press “-” button

to the previous track.

 To remove your TF card, simply pause the playback and

gently unplug it from the slot. Remember to turn off the

speaker, too.

OPERATING THE SPEAKER IN AUX-IN MODE

If you are using an iPod, MP3/MP4 player or other mobile phone

which can not connect this unit via bluetooth directly, you can

still play it on the speaker via an audio connecting cable.

1. Plug one end of the 3.5mm audio cable (excluded) into the

headphone or line out jack on your player, plug the other end

of cable into the unit AUX-IN jack of the speaker.

2. Turn on the external audio source and play your device.

3. Slide the Power ON/OFF switch to ON position to turn on the

unit, the operating mode indicator will light up in Red.

4. The volume level can now be controlled through the main unit.

Operate all other functions on the external device as usual.

Notes:

1). If you're connected to the Line out Jack of your external

device, then you only need to adjust the volume control of this

speaker. If you're connected to the Headphone Jack of your

external device, then you may need to adjust both the volume