User's Manual

10
MW-1239
-5-
This USB port can supply power 5V/2.1 A
Listening to FM Radio
Setting up the Antenna
Unstrap and extend the wire antenna fully for best
reception. Do not strip, alter or attach to other antennas.
Radio Tuning
1. Press MODE Button until FM icon shown on the display
to enter the Radio mode.
2. Press the “ ” or “ ” button to automatically search for
stations with strong signals, the tuner will stop on the first
strong station signal it finds.
3. Press ST./MO. button on the remote control to select the
stereo (St ON)/monaural (St OFF) mode.
Notes:
-Manual tune to select weaker stations that might be by
skipped during automatic tuning
- If the automatic tuning does not stop on the exact frequency
of the station, for example, it stops on 100.8MHz instead of
100.6MHz.
Radio Preset Stations
The unit allows you to store up to 50 FM stations to recall
at any time.
Preset Stations
Press and hold the “ ” button until the frequency digits
on display begins to scan then release the button, the unit
will auto search from low-end frequency toward high-end
frequency and automatically save up all the stations with
strong signals in sequence. It will automatically play the
No. 1 station saved once the auto searching is finished.
Recalling the Preset Stations
Press the button to select the preset station in sequence
“ ”