User's Manual

*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your
other devices (Blu-ray player, game system, etc) see your device’s user manual.
**When using either of the Digital Inputs, if the status indicator light is flashing quickly:
(A) Ensure that the Optical cable or Coaxial cable is properly connected;
(B) Try setting the TV output to PCM;
(C) Connect directly to your Blu-ray or other source, some TVs do not pass through digital
audio.
BASIC OPERATION
TURN ON/OFF THE SOUND BAR
- Before connecting the AC power cord, ensure you have completed all other connections.
- Ensure that the power supply voltage corresponds to the voltage printed on the back or the
underside of the unit.
1. Plug the connector of AC cord into the AC socket on the back of the sound bar.
2. Press the /SOURCE button on the main unit or the button on the remote control
to switch the sound bar on. The LED indicator will light up and showing the last used
mode.
3. To turn off the sound bar and enter standby mode, press and hold the /SOURCE
button on the sound bar or press the button on the remote control.
SELECT DIFFERENT INPUT MODE
Press the /SOURCE button on the main unit or the MODE button on the remote control
repeatedly to select different input mode.