User's Manual

2. Activate Bluetooth on the compatible device, and set it to search for compatible
devices.
3. Select the speaker name:”MW-1680” from the list of found devices.
Note: Only one playback unit can be connected to the speaker. If the speaker is already
connected to another playback unit, the speaker will not appear in the Bluetooth selection
list.
4. If your device asks for a passkey (depending on the device manufacturers, model, and
software version), then enter digits “0000” (four zeros) and press OK.
If pairing has been carried out successfully, “connected” will be sounded and the “bT” stops
flashing.
5. After connected completely, you can listen to music wirelessly through Bluetooth and
select music in Bluetooth device.
6. Press “▲” / “ ” button on remote control or “+”/ “-” button on the main unit to
raise/lower the volume level.
7. To disconnect the Bluetooth function, switch to another function on the unit or disable the
function from your Bluetooth device.
8. To stop the unit, press and hold the /SOURCE button on main unit or press the
button on the remote control to turn off the device.
Tips:
1. If a mobile phone on which you are playing music receives a call, the music will be
interrupted. The sound however is not played back via the speaker. After you have ended
the call, the devices are connected to each other again and playback continues.
2. If there is an existing connection, press and hold the button on the remote control for
3 seconds to break the current connection and initiate pairing mode
3. The player will also be disconnected when your device is moved beyond the operational
range. If you want to reconnect your device to this player, place it within the operational
range.
4. If the device is moved beyond the operational range, when it is brought back, please
check if the device is still connected to the player.
5. If the connection is lost, follow the instructions above to pair your device to the player
again.
6. The Bluetooth compatibility cannot be ensured for devices (e.g. mobile phones) getting
released in the future.
OPTICAL/COAXIAL (DIGITAL INPUTS) OPERATION
1. Ensure that the unit is well connected to the TV or other audio device via Optical or
Coaxial cables (not included).
2. While in Power On mode, press the /SOURCE button on the main unit or the MODE
button on remote control repeatedly to select the relevant OPTICAL or COAXIAL mode.
3. Operate your audio device directly for playback features.
4. Press “▲” / “ ” button on remote control or“+”/ “-” button on the main unit to raise/lower
the volume level.
Note: If there is no sound come out from the sound bar and the status indicator light flashes
quickly, Make sure the audio (digital output) setting of your source player (e.g. TV, DVD
player, game player) is set to PCM.