User's Manual

Notes:
-The LED display will go off automatically if the sound bar is sitting idle and no input
signals are being received for about 5 minutes, press any button once to light up the
display again.
-When the sound bar is sitting idle and no input signals are being received for about one
hour, the sound bar will automatically switch to Standby mode.
Adjust the Volume
• Press the +/– button on the main unit or ▲/ button on remote control to adjust the
volume level.
• While adjusting the volume, the status indicator flashes quickly.
• While the volume level reaches its maximum or minimum level, the status indicator will
flash once and then stop flashing.
PLAYBACK WITH BLUETOOTH DEVICE
This device offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device.
Due to the different device manufacturers, models, and software versions, a full functionality
cannot be guaranteed.
Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a mobile phone, for the first
time, you must pair and connect it to the device.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone). For
this, refer to the operation manual of your player.
2. While in Power On mode, press the /SOURCE button on the main unit or MODE
button on the remote control repeatedly to select the Bluetooth mode. “bT” flashes to show
that the pairing mode is activated.
Pair the Speaker
1. If you haven’t paired the speaker with a device, or the paired devices list is empty,
pairing mode is activated.