BRAND Owner's Manual MW-1680 2.
IMPORTANT SAFETY INSTRUCTIONS Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
serviceable parts inside. Refer all servicing to qualified service personnel. SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions must be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference. 3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow instructions - All operating and users’ instructions should be followed.
manufacturer. 17. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn. 18. When the Subwoofer is in standby mode, the power is not entirely cut off. Please set the main power ON/OFF switch on the rear of the unit to OFF position to cut off the power when not in use. 19.
1. To prevent possible hearing damage, do not listen at high volume levels for long time periods respectively a sudden high volume level. 2. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while. 3. The appliance is not intended to be operated by means of an external timer or separate remote control system. 4.
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
Sound Bar 1. - Button Press to decrease the volume level. 2. /SOURCE Button Press this button to turn ON or press and hold to Standby mode. Short press this button to select different play mode during power on 3. +Button Press to increase the volume level. 4. USB Port 5. LED DISPLAY 6. Remote Control Sensor 7. Optical Socket 8. Coaxial Socket 9. 3.5mm Aux-in Jack 10. AC Socket Remote Control 1. : Switch the unit between ON and STANDBY mode. 2. ▲: Press to adjust volume level up. 3.
button to adjust the bass level. Press this button again to set Tremble, then press ▲/ button to adjust the tremble level. 9. MUSIC: Press to choose Music surround sound effect. 10. MOVIE :Press again to choose Movie sound effect. PREPARATIONS Prepare the Remote Control The provided remote control allows the unit to be operated from a distance.
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual. **When using either of the Digital Inputs, if the status indicator light is flashing quickly: (A) Ensure that the Optical cable or Coaxial cable is properly connected; (B) Try setting the TV output to PCM; (C) Connect directly to your Blu-ray or other source, some TVs do not pass through digital audio.
Notes: -The LED display will go off automatically if the sound bar is sitting idle and no input signals are being received for about 5 minutes, press any button once to light up the display again. -When the sound bar is sitting idle and no input signals are being received for about one hour, the sound bar will automatically switch to Standby mode. Adjust the Volume • Press the +/– button on the main unit or ▲/ button on remote control to adjust the volume level.
2. Activate Bluetooth on the compatible device, and set it to search for compatible devices. 3. Select the speaker name:”MW-1680” from the list of found devices. Note: Only one playback unit can be connected to the speaker. If the speaker is already connected to another playback unit, the speaker will not appear in the Bluetooth selection list. 4. If your device asks for a passkey (depending on the device manufacturers, model, and software version), then enter digits “0000” (four zeros) and press OK.
3.5MM AUX INPUTS OPERATION 1. Ensure that the unit is well connected to the TV or other audio device via the accompanied 3.5mm-RCA cable. 2. While in Power On mode, press the /SOURCE button on the main unit or the MODE button on remote control repeatedly to select the AUX input mode. 3. Operate your audio device directly for playback features. 4. Press “▲” / “ ” button on remote control or “+”/ “-” button on the main unit to raise/lower the volume level.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet. If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit. CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
by screwing the included flat head screws into the anchors and tighten until the screw head is fully inserted and flush with the metallic bracket. Note: The distance between the brackets should be 350 mm. Place the Sound bar with wall-mounting brackets (marked with “S” symbol) onto the mounting brackets (marked with “W” symbol) which fixed on the wall, then use the included two short screws to tight them. Make sure the Sound bar is attached firmly to the wall.
PROBLEM No power POSSIBLE CAUSE The unit is disconnected from the SOLUTION Reconnect to the AC outlet AC outlet AC outlet is not functioning Battery empty Installed battery wrong polarity Too far from the main unit Change to another outlet Select wrong source input Select correct source input Sound is distorted Volume level is set too high Decrease the volume level Unit gets warm after extended play at high volume This is normal Turn the unit off for a period of time or lower volume No sound wh
Standby Power Consumption of Sound bar...................................................................<0.5W Power of Remote Control....................................... 1 x DC 3V CR2032 button cell (included) Remote Control Distance………………………………….……………….upto 6m (Angle≤45°) Output Power (RMS)....................................................................................................20Wx2 Full Range Speaker ...................................................................................
