User's Manual

Use a screwdriver to remove the screw(A)
Remove the battery compartment cover(B)
Remove the protective tab from the battery.
Place the battery into the foreseen area.
Make sure that the side marked with + is facing up, as
shown in the illustration.
After inserting the battery, replace the battery
compartment cover (B) . First insert the flap (C) into the
foreseen gap of the battery compartment. After fully
close the battery compartment cover (B)
Secure with the screw (A)
If the remote control does not work properly, replace the
battery.
Use batteries of high quality only. Batteries of low quality
might leak and cause damage.
Note: Remove the battery, if the remote control is not to
be used for a longer period of time, as it might be
damaged by leaking batteries.
Precautions Concerning Batteries
1. When the Remote Control is not to be used for a long time (more than a month), remove
the battery from the Remote Control to prevent it from leaking.
2. If the batteries leak, wipe away the leakage inside the battery compartment and replace
the batteries with new ones.
3. Do not use any batteries other than those specified.
4. Do not heat or disassemble batteries. Never throw them in fire or water.
5. Do not carry or store batteries with other metallic objects. Doing so could cause batteries
to short circuit, leak or explode.
CONNECTING AN EXTERNAL DEVICE USING AN HDMI CABLE
HDMI is the standard digital interface for connecting to TVs, projectors, DVD players,
Blu-ray players, set top boxes, and more.
HDMI is an interface that enables the digital transmission of video and audio data with just a
single connector.
HDMI prevents any degradation to the signal due to conversion to analog and maintains the
video and audio quality of the original digital source.