User's Manual

2. While in Power On mode, press the / button on the main unit repeatedly or
press the OPTICAL or COAX button on remote control to select the relevant OPTICAL or
COAXIAL mode.
3. Operate your audio device directly for playback features.
Note: If there is no sound come out from the soundbase and the status indicator light
flashes quickly, Make sure the audio (digital output) setting of your source player (e.g. TV,
DVD player, game player) is set to PCM.
3.5MM AUX/RCA INPUTS OPERATION
1. Ensure that the unit is well connected to the TV or other audio device via the
accompanied 3.5mm-RCA cable.
2. While in Power On mode, press the / E button on the main unit repeatedly or press
the AUX/RCA button on remote control to select the AUX/RCA input mode.
3. Operate your audio device directly for playback features.
Note: If you want to play it via RCA input, make sure the 3.5mm Aux in socket is not
plugged in
USB PLAYBACK
This Sound Base has also been developed in line with the latest technical advances in the
USB filed. The wide range of different USB storage devices of all types which are currently
on the market, unfortunately do not allow us to guarantee full compatibility with all USB
storage devices. For this reason, in rare cases there may be problems in playing back files
from USB storage devices. This is not a malfunction of the device.
1. While in Power On mode, press the / button on the main unit repeatedly until
the status indicator changed to yellow or press the USB button on remote control
directly to select the USB mode.
2. Connect a USB storage device directly into the port, after a few seconds, it will start
music playback automatically.
Note: Always directly connect a USB storage medium to the USB port to prevent any
malfunctions.
Troubleshooting Guide
Should you experience difficulties in the use of this player, please refer to the following
chart.
PROBLEM POSSIBLE CAUSE SOLUTION
No power
The unit is disconnected from the
AC outlet
AC outlet is not functioning
Reconnect to the AC outlet
Change to another outlet
Remote control does
not work
Battery empty
Installed battery wrong polarity
Too far from the main unit
Replace battery
Re-install battery in correct
polarity
Reduce the distance