User's Manual

Notes:
-The LED display will go off automatically if the sound bar is sitting idle and no input signals
are being received for about 5 minutes, press any button once to light up the display again.
-When the sound base is sitting idle and no input signals are being received for about one
hour, the sound bar will automatically switch to Standby mode
Adjust the Volume
• Press the +/– button on the main unit or ▲/ button on remote control to adjust the
volume level.
• While adjusting the volume, the LED Display window shows the volume level. The volume
range from as low as level 0 to as high as level 32,
• If you wish to turn the sound off, press the MUTE button on the remote control, the sound
will be mute, meanwhile, the LED words will switch between Mute and the modes you are
playing . Press the MUTE Button again or press the VOL +/- button to resume normal
listening.
ARC (HDMI OUT)
ARC(Audio Return Channel) transfers digital audio signal to the HDMI OUT(ARC) port.
1. Connect the TV supporting ARC to the Sound base with an HDMI cable.
2. Tum on the TV, and turn on the Sound base.
3. Press the the / button on the main unit or MODE button on the remote control
repeatedly to select ARC mode
NOTE: If the HDMI cable does not support ARC feature, ARC may not work property.
PLAYBACK WITH BLUETOOTH DEVICE
This device offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device.
Due to the different device manufacturers, models, and software versions, a full functionality
cannot be guaranteed.
Logging on devices (Pairing)