User's Manual

12
1. Plug one end of the 3.5mm audio cable (included) into the
headphone or line out jack on your player, plug the other end
of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Press M Button until “ AUH” shows up in the display to enter
the AUX-IN mode.
4. The volume level can now be controlled through the main unit.
Operate all other functions on the external device as usual.
Notes:
1). If you're connected to the Line out Jack of your external
device, then you only need to adjust the volume control of this
speaker. If you're connected to the Headphone Jack of your
external device, then you may need to adjust both the volume
control of your external device and the volume control of this unit
to find the most desirable volume setting.
2) Press and hold the
button to turn off the unit when you
finish listening.
Don't forget to turn off the power of your external device as well.
OPERATING ON BATTERY POWER
A fully charged battery provides approximately three hours of
use at maximum volume. The rate of battery discharge varies
with the volume setting. You can extend the battery playback
time by reducing the volume.
Battery Status Indicator
The battery status indicator is normally off to conserve battery
power. When the internal battery capacity is very low, the