User Manual

Introduction for more APP functions
In the setting interface of system, click the vehicle setting to enter the setting interface of
In the setting interface of system, click "System Parameter Setting" to enter the setting
In the setting interface of system,click “Setting of Tire Adjustment” to enter the setting
Click "Help" in the setting interface of system to enter the help interface as shown in Figure D.
vehicle as shown in Figure A, you can set the
picture, name and type of vehicle as well as license numbers.
interface of system parameter as shown in Figure B,
you can either define the temperature and pressure range of the front and tires according to the actual situation, or can replace
the display
interface of tire adjustment as shown in Figure C,
you can change the display frame according to the actual sensor position.(You can click on the instruction symbol in the upper right corner
to
Here you can view the installation instruction
App更
1、在系图A所
2、在图B所
3、在图C所
4、系统图D所及App使
A
B
C
D
车辆设定
?
车辆
车辆
车牌
车辆1
奔驰
A 88 888
系统参数
?
胎压
胎压单 位选择
kPa
psi
Bar
Kg/cm²
6.4
胎压
1. 9
前轮
后轮
胎压
2. 8
胎压
1. 9
温度单 位选择
胎压
65
胎压
65
前轮
后轮
恢复默认
车辆1
1 2
43
00000
--Kpa
--℃
00001
--Kpa
--℃
00003
--Kpa
--℃
00002
--Kpa
--℃
帮助
设备装说
APP使用说
unit or restore the default settings.
learn the transposition operation)
of equipment and the use instruction of App.
明:机App修
示屏
Note:The relevant parameters of the voice display are modified by the mobile phone App.After setting system parameter , setting tire
adjustment, or updating sensor binding operation, you need to rebind the voice display to update the settings.