User Manual

After binding the ID codes of all the tires, click the upper right corner
After entering the interface of Figure B, click on “Supporting Device
After entering the interface of Figure C, click on “Searching for Device”
Shortly press the button to turn on the solar voice display,
When the "MLD_R01" key in Figure D appears, click this button to bind.
When the “Binding Successful” voice is heard and the prompt box in
of the main interface to set the symbol
Binding”.
to find the solar voice display.
then press button for 5 seconds untilthe token
“ ”on the display screen flickers. Then the solar voice display
enters the
Figure E appears, the solar voice
display is bound, and finally click “I Know” to exit the prompt box.
Binding of Solar Voice Display
太阳能语音显示屏绑定
1、绑定好所有轮胎的ID码后，点击这界面右上角设置符号进入图A界面;
2、进入图B界面后，点击“配套设备绑定”;
3、进入图C界面后，点击“搜索设备”以查找太阳能语音显示屏;
4、短按按钮开启太阳能语音显示屏,然后长按太阳能语音显示屏按键约5秒，直到显示屏幕上的" "标志交替闪烁，
此时太阳能语音显示屏进入配对模式;
5、当出现图D中的“MLD_R01”按键时,点击此按键进行绑定;
6、当听到“绑定成功”语音且出现图E中的提示框时,太阳能语音显示屏绑定成功,最后点击"我知道了"退出提示框;
A
B
C
D
E
系统设置
语音提醒
语言 简体中文
车辆设定
系统参数 设定
绑定新设 备
调胎设定
配套设备 绑定
日志报告
帮助
配套设备绑定
?
搜索设备
?
搜索中...
MLD_R01
配套设备绑定 配套设备绑定
?
搜索设备
完成
资料发送成功
我知道了
to enter the interface A.
matching
mode.