User Manual

4
1.Red indicator : blinks means searching network.
Blue indicator: blinks means network connection is successful.
meanwhile searching the server. Always lights means device online.
Yellow indicator: blinks means Ethernet active.
Green indicator: blinks means Ethernet access successful.
2. Reset to factory setting: After powered on 1 minute , press and hold
the reset button for more than 5 seconds then release, and hear the
voice"reset complete" means reset to factory setting successful.
Fault type Indicator Status Solution
No Power Indicator off Check the power connection status
Boot Failed
Red & Blue LED
always lights
Power off 5 seconds, then power on again
Connect to
WiFi Failed
Red LED always blinks
Check the W iFi signal strength near the
installation of the device through the
mobile phone (it needs to be greater than
or equal to 2), check whether the W iFi
password is correct, if the password is not
correct, please click return, reenter
password.
Connect to
Server
Failed
Blue LED always blinks
Check whether the network is connected
to the Internet normally
Common Fault List
Main Parameter
Operation Status Description
Product Name Smart Security Light Camera
Model Number MX5
Camera Resolution 1920*1800（1080P)
Viewing angle 110°
Operational Temperature -20℃ to +50 ℃
WIFI IEEE 802.11b/g/n
Power Supply 100-240VAC ,50/60HZ,0.2A
Power 25W(MAX)
Weight 980g
Dimensions(H x W x D) 300mmx111mmx112mm