User's Manual

8. Installation method

Hold the host and bracket with both hands respectively.Select a suitable position, such as

the right rear or the middle of the rear-view mirror, remove the adhesive protection sticker

and stick it on the front windshield. (do not move within 24 hours after pasting),Adjust the

shooting angle of the host, and it is best to center the front of the vehicle on the screen.

9. Installing memory card

Please use a genuine microSD memory card of from 8GB to 256GB wi

th a speed r

ating

of class 10 or higher. Insert the memory card to the camera's card slot, press it until it clicks.

To take the card out, tum off the camera first then push the card into the slot until it clicks out.

NOTE: When using a 64GB, 128GB or 256GB MicroSD card, please format it to FAT32 on

the camera first.

Please insert the memory card into the host memory card slot with the metal side facing the

screen. If it says 'please insert TF card' or 'error card please format' here, please press the

recording button (OK button) and press the power button to access into the menu, go 'system

setup' and choose 'Format SD Card'. Then select the" OK" and wait for 10 seconds. Then the

card will be formatted successfully.

(If you format it on computer, please search online on "How

to for

mat a 64GB microSD card

to FAT32".)

NOTE:The MicroSD card should be formatted every 2 weeks to maximize the lifetime of

The memory card.

Please do not take the card out when the camera is recording in case that the important

video files missing.

USER MENUAL