User's Manual

6
3) The notification will disappear if the Code Pairing is successful, and the receiver starts to decode the image signal(usually
takes 5 seconds). (Shown as below)
You are going to view the image after the code pairing process is successfully done. (Shown as below)
4) Use the Same Method to complete the code pairing for Camera 2, Camera 3, or Camera 4. (If you have)
4. Image Display Switching.
After the code pairing process is completed, you can switch the viewing image by click the channel switching button from Cam1, Cam2,
Cam3, Cam4 and Quad View. (As shown below)