For SMS remote control setting, different value comes with different extra power consumption “0” the highest and “off” zero. The maximum for text messages is 60 bytes. If your phone number is put in properly during setup, once the camera receives the command, it will send you a text message saying “Message format OK”. i the code 60 function is turned on, the camera will also send a picture that it takes after executing the command along with the let message.
day. 0 means no limit many pictures as it takes. The camera takes 6 Time lapse: off (0), on (1) , Time indicated by | 16*101300 ry numbers. Example: 1h 30m 0s becomes hours whether triggered or not Camera functions oe Timer off (0), on (1) . Time indicated by 2 | 17%113301 | only between digits, Example: 13h 30m becomes 13 30. 5304 1:30pm ~3:30pm when triggered. Camera functions 18 Timer 2: off (0), on (13 .
SME Remote Control Use EW wr key te navigate Use Eta to set the value 2.8 View Local MONO name and Si gal Strength on TFT Screen You can find your local Mobile Phone Network Operator’s name and the signal strength on the TFT display screen on the camera, just like you can see the reception on a regular cel] phone. Install the SIM card and 12 AA batteries. Switch to the TEST position. If you like, you can connect the camera to a TV, using the provided TV/AV IN cable.
slightly move the camera to make sure the LED light in the front keeps flashing. If you wait too long {over three minute), the screen may power off to save battery. If that happens, you'll need to switch to OFF and then TEST to start over. Dave Sl cant « Holt le imper min = = BF oon Signal strength can be full 6 columns. To make the MMS module to work, at least two bars are required. If you only see one bac, the reception is too weak for the MMS to function. Sore U.S.
BNL EB messiahs 2.89 Cameras Working with MMS When all of the following conditions are met, the camera should start sending pictures to your cell phone and/or e-mail account. If you encounter any problems, it is highly recommend that you go through this list first. The caners is ON and functional. The SD card has enough space. The 12 AA batteries are installed matching the polarity symbols on the camera and hss enough power capacity. The caner is in Cam mode or Camera + Video mode and not Video mode.
By conducting this test, you can identify the best placement when mounting and chiming the LTL ACORN camera. In general, we recommend placing the camera 3 to § fest (1 to 2 meters) above the ground. To avoid potential false triggers due to temperature and motion disturbances, please do not aim the camera at a beat source (i.e. the san} or nearby tree branches and twigs. The ideal direction to aim at is the north, Also, remove any twigs close to the front of the camera. 2.
ADVANCED SETTINGS The ETL ACORN trail camera comes with preset manufacturer settings. You can change the settings to nest your requirements, by manually operating on the camera or programming on your computer, 3.1 Parameter Settings Switch to the TEST position to enter the Test mode. In this mode you can take pictures or video clips like using a regular digital camera, or enter the Menu to set up parameters.
time. Caution: make sure wanted files on the SD card are backed up. Photo Size (affects pictures only) SMP, 12MP, 2MP Select desired resolution for photos from 2 to 12 megapixels. Higher resolution produces better quality photos, but creates larger files that occupy more space and take longer time to write to the 8D card, which slightly affects the shutter speed. SMP is recommended. Video Size (affects video clips only) 144031080, 1280720, 640X480 Select video resolution (pixels per frame).
day. For instance, if the starting time is set at 18:35 and the ending time at 8:25, the camera will function from 18:35 the current day to 8:25 the next day. Outside the time period the camera will not be triggered or take photos/videos. This feature can be used together with Tires Lapse feature. Timer A second timer is available in case you need the camera to function in two separate time periods. Password Set Off, On Set up a password to protect your camera from unauthorized users. Serial No.
