LTL ACORN® MMS Wireless Scouting Camera Lt-6310M HD Video Series SMS remote control Trigger time=0.
TABLE OF CONTENTS General Information 1.1 Features 1.2 Application 1.3 Illustration Getting Started 2.1 Inert SIM CAI oeveiieiveiienserenonsisse reins seamstress Sven vars 5 2.2 Load Batteries on the Front Camera . 2.3 Insert SD Card and Format It 2.4 Set up Camera on PC 2.5 Set up MMS Function on PC 2.6 Set up GARS Function on PC. 2.7 SMS Remote Control & Table of Command Code 2.8 View Local MOP Name and Signal Strength on TFT display; 2.9 Camera Working with MMS 2.10 Enter Test Mode. 2.
GENERAL INFORMATION Introduction This manual applies to model LU-6310MC, Lt-6310MG, Lt-6310WMC, Li-6310WMG Li-6310 series camera, with its highly sensitive Passive Infra-Red (PIR) sensor, detects the sudden change of ambient temperature caused by moving game in a region of interest (ROIL, triggers to take pictures/videos, and sends the images via 2G GSM network to your cell phone or email account, With newly developed SMS remote control feature you can change the settings of your camera by sending it text m
« Programmable to work as Time-Lapse camera taking pictures/videos in long range day and night, © When Timer setting is turned on, programmable to only work in specified period every day. This feature can be used together with Time Lapse feature to meet your timetable. « Built-in 2.0 inch TFT color screen to review images and videos at the back of the camera. Date, time, temperature, moon phase and battery level can be stamped on picture Lockable and password protected = Send 640 x 480 resolution MMS image.
Figure 1.2: Bottom View of Lt I-6310M The camera provides the following connections for external devices: USB 2.0 port, SD card slot, TV out jack, and external DC power in jack The 3-way Power/Mode Switch is used to select the main operation modes: OFF, ON and TEST. To power up the camera, install four NEW high-performance alkaline or lithium AA batteries in the camera. FOR BETTER PERFORMANCE, WE RECOMMEND USING ENERGIZER LITHIUM AA BATTERIES. To achieve longer in-field life, always install 12 AA batteries.
GETTING STARTED 2.1 Insert SIM Card (Only for Model L-6310MG) A SIM card is needed from a Mobile Phone Network Operator (POMPANO. Make sure they provide Multimedia Messaging Service (MS. Insert the SIM card into the slot at the bottom of the camera. Push once to insert, twice to remove.
2.2 Load Batteries Open the bottom cover by pulling down the lock heel. Push or dig the two battery boxes and release the battery doer. ® Forestall 4 AA batteries in the front of camera and 8 AA batteries in the back of camera. Make sure the polarity matches the sign on the cover. « Push to close the door. Alternatively the camera can run on an external 6V~12V DC power source (optional).
Always format the SD card on the CAMERA when using i¢ for the first them. Switch to the TEST position to enter the Test mode. Press MENU button to access the main menu. Scroll down to Format. Press OK to format the SD card. 2.4 Setup Tamers on PC After formatting the SI) card on the camera pop the SI) card out and insert it into your computer.
BERK Be wii Set up the caners based on your own need, Please reference Section 3.1 Parameter Settings in Advanced Settings to find detailed explanations for each setting. Click on | Bo retrieve the computer time, Click on ss fo find and choose the drive where the SI card is placed, usually denoted by a letter after E (F drive or G drive). For example, if the SD card is inserted into the F drive, then you should click on BO NOT choose any folder under Fi\ Click on.
Click Bait and go back to the main menu. 2.5 Set up MMS Function on PC On the main menu, Select 141 6310MG and press MMS Setup.
An important first step is to determine the format of the files that the camera will send you. On the right of the first row where it says MMS Status, choose among three options: “VGA”, “ISMS, and “OFF”, ® VGA: the camera will send 640X480 pictures to your phone or e-mail account @ SOBS: the camera will send only texts to you OFF: the camera will not send anything Then you need to choose how you like to set up the MMS Mode Auto or Manual.
é& WE commemorator Bie BE mB tennis: Re sew penetrated OF Click on Ell and back to main men. Retrieve the SD card and insert it in the camera. \Switch to the TEST position to enter the TEST mode. Two lines in red show up consecutively on the TFT display, indicating the setup files have been successfully installed on the camera. If you don’t see the two lines, the enumerate and sextuplet are not installed successfully. You need to start over from Step 2.
For the camera to send pictures, SMUT status must be set to “VGA”. “SMS” indicates sending texts and “OFF” means nothing will be sent. In Lute mode, first select country and operator. In Anus] mode, you fill in APN / Account / Password. This parameter you can find from your mobile operator.
camera wakes up to either receive or execute the commends. “0” indicates that the camera will wake up and search for commands automatically every 10 minutes, and send feedback once it recessives them. “1-24” indicates search intervals of 1~24 hows. “off”, on the other hand, means SMS remote control is turned off. This design with the waking intervals helps conserve battery. Select value based on your own need. Te les more about SMS remote control please refer to 2.7.
