User's Manual

6
When battery level gets low, the Motion Indicator in the LED array will flash
blue. On Model Ltl-5310MM, a “Battery Low” text alert will be sent
automatically to the user’s cell phone or email account.
2.3 Insert SD Card
The camera does not come with internal memory. So it will not work without
a SD (Secure Digital) memory card or SDHC (High Capacity) card. Before
inserting the SD card into the card slot, please make sure the write-protect
switch on the side of the SD card is “off” (NOT in the “Lock” position). The
supported memory capacity is up to 16GB. If you use a card capable of
above 16GB, make sure you test it before putting the camera in use.
Figure 2-2
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF MODE BEFORE
YOU INSTALL OR REMOVE THE BATTERIES OR THE SD CARD.
2.4 Enter Test Mode
Switch to the TEST position to enter the Test mode. In this mode you can
take pictures or video clips like a regular digital camera, or enter the Menu to
set up parameters. On the keypad there are four “shortcut” functional keys
(see Figure 2-3) working as below:
Figure 2-3
x Press the key to set the camera to shoot video clips.