User's Manual

QUICK START

2.1 Insert SIM Card (Only for Model Ltl-5310MM)

You need to purchase the SIM card

from your local Mobile Phone

Network Operators(MPNO),

making sure they provide

Multimedia Messaging Service

(MMS). Ask them for the relevant

information to configure the MMS

settings on your camera.(Please

reference 3.4 Set up MMS

Function on PC in the Advanced

Operation section.)

Open the battery compartment

cover, slide the SIM card in the slot

and lock it.

Figure 2-1 MMS-module Battery

Box

2.2 Load Batteries

To install batteries on the camera (Part # Ltl-5310M), please follow the

instructions below.

Open the bottom cover by pulling down the lock hole.

Push the cover of the battery compartment and release. It will pop out.

Install 4 AA batteries. Make sure the polarity matches the sign on the

cover.

Replace the cover.

To install the additional battery box (Part # LTL-BM1 or LTL-MM1), please

reference Appendix III: Instructions on Installing Battery Box)

Alternatively the camera can run on an external 6V~12V DC power source

(optional). When both external power and batteries are connected, the

camera will be powered by the external one preferentially. Bundled with our

external solar power supply (purchased separately), the camera can work in

the field over one year without changing batteries.