User's Manual

4
The camera provides the following connections for external devices: USB 2.0
port, SD card slot, TV out jack, and external DC power in jack. The 3-way
Power/Mode Switch is used to select the main operation modes: OFF, ON
and TEST.
To power up the camera, install four NEW high-performance alkaline or
lithium AA batteries in the camera. FOR BETTER PERFORMANCE, WE
RECOMMEND USING ENERGIZER LITHIUM AA BATTERIES. To achieve
longer in-field life, always install the additional battery box which contains four
more AA batteries. (Please reference Appendix III: Instruction on Installing
Battery Box)
Figure 1.3: Back View of Ltl-5310M and Front View of Battery Box
CAUTION: If you are not using the camera for an extended period of
time, it is highly recommended that you remove the batteries from the
camera to avoid possible acid leak that may damage the camera which
would void the warranty.