User's Manual

SMS remote control, the value ranges from “0”to “off “which represents the

SMS receipt time, “0” indicates 10mins, “1~24” indicates the interval time

1~24h to receive SMS, “off” indicates the close of the SMS remote control.

Select the related value based on your own need.

Then press save parameter to SD card, generate and insert SD card

into camera and power on the camera, done.

3.6Camera Working with MMS

When you have the Model Ltl-5310MM, or you have upgraded your Model Ltl-

5310MC by purchasing the MMS-module battery box (Part # LTL-MM1), not

only will your camera work as a standard trail camera, but also send pictures to

your cell phone and/or email account, when it meets the following

requirements.

x The camera is ON and functions. The SD card has enough space. 8 AA

batteries with enough power capacity. The camera is in Cam mode or

Cam+Video mode, not Video mode.

x SIM card is installed. The MMS service is active (some MMS services

need pre-paid balance in the account.) The SIM card is not password-

protected.

x Only when the switch is in OFF position, you install the MMS-module

battery box.

x The signal is strong in the field. The recipient’s phone number is entered

correct. You are suggested to take the receiving phone with you and do

the send-and-receive test on site.

x MMS parameters are set correct.