User's Manual

19
All the order code ends with“*”, all the value ends with“#”
EX:
LTL01*0#02*2#06*S30#07*10A3Z#AA
Definition camera mode 1.3MP interval:30s serial No: 0A3Z
For SMS remote control setting, different value with different extra
power consumption, “0” the highest, “off” zero.
Maximum 60 bytes for all the SMS content, for multiple parameters
setting please send by more times. Please do not send SMS
continuously, send again only when you confirm the success of the
last order by checking.
SMS received by module, after the identification of the phone number
the module will response immediately on parameter set format
success or failure.
CAUTION: SMS parameter 0~24 is interval time on
SMS text detection , with parameter of “00” camera
will check automatically and frequently whether
there is massage received, this situation may result
in significant increase in power consumption, which
probably leads to no PIR detection during this period,
advice parameter of “1~24”.
Set up SMS remote control on pc
when use order code 12,13 to set phone number or
email adress 12 code is priority for use which means
if you set 13 only without 12 setup13 order wowld be
out of work.