User's Manual

purchasing the MMS-module battery box (Part # LTL-MM1), skip the following

step and go directly to 3.4 Set up MMS Function on PC. If your camera is

Model Ltl-5310MC, the standard scouting camera, you’re done with the

camera setting. Click on Exit to exit the interface.

Retrieve the SD card from the computer and insert it in the camera. Switch to

the TEST position to enter the TEST mode. A message will show up on the

TFT display, indicating the Camera has been successfully set up. You are set

with the camera.

ATTENTION: THE PASSWORD CAN ONLY BE SET UP ON THE CAMERA,

NOT ON THE PC.

3.4Set up MMS Function on PC

After you click on Exit on the Camera Setup interface, the following window

prompts again:

Click on MMS Setup, and you will see the following interface: