User's Manual

10
Set Clock Enter Press Enter to set up date and time.
Internal capacitor will retain the clock
time for up to 7 minutes when
changing batteries.
Picture No. (affects
still photos only)
01 Photo,02Photos,
03 Photos
Select the number of photos taken in
sequence per burst in Camera mode.
Please also refer to the Interval
parameter.
Video Length
(affects video clips
only)
Avi 10 s,optional
from 1s to 60s
Videos are in AVI format that can be
played back on most media players.
Interval 1 Min, optional from
1S to 60M
Select the length of time that the
camera will wait from when the last
picture was taken and written in the
SD card, until it responds to any new
triggers from the PIR sensor. During
the selected interval, the camera will
not take pictures/videos. This
prevents the SD card from filling up
with too many redundant images.
Sense Level High, Normal, Low,
Off
Select the sensitivity of the PIR
sensor. The High setting suits
indoors and environments with little
interference, while the Normal/Low
suits outdoors and environments with
more interference, Off which turns
the function off. Temperature also
affects the sensitivity. The High
setting is suitable when the ambient
temperature is warm, and the Low
setting is helpful in cold weather.
Time Stamp (affects
still photos only)
On, Off Select On if you want the date & time
imprinted in every photo.
Timer 1 Off, On Select On if you only want the
camera to work within a specified
time period every day. For instance,
if the starting time is set at 18:35 and
the ending time at 8:25, the camera
will function from 18:35 the current
day to 8:25 the next day. Outside the
time period the camera will not be
triggered or take photos/videos. This
feature can be used together with
Time Lapse feature.