Instruction Manual

①Signal strength
②Temperature
③Camera connected
④Alarm prompt
⑤Feeding
⑥Lullaby
⑦Camera cycle time
⑧Sound sensitivity
⑨Date/time
⑩Battery capacity
HOW TO USE?
Getting started
Step1:
1. Connect the camera to the AC adapter(2.5mm).
2. Plug the AC adapter into a socket.
Note: Place the camera away from your baby 3ft/1m at least.
Step2:
1. Connect the monitor to the AC adapter(3.5mm).
2. Plug the AC adapter into a socket.
Note: The monitor takes about 3 hours to be fully charged, and it
lasts about 4hours.
Step3:
Long press the power button to turn on the monitor then you can see
the monitoring interface.
Note: The camera and monitor were paired already before you get
them. So you don’t need to pair them.