User's Manual

Thermal Image Scope User Manual
vii
Do not leave the battery in an extremely high temperature surrounding environment, which
may result in an explosion or the leakage of flammable liquid or gas.
Do not subject the battery to extremely low air pressure, which may result in an explosion or
the leakage of flammable liquid or gas.
Maintenance
If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
It is recommended to reboot the device every 2 hours when using it to ensure the device
performance.
Using Environment
Make sure the running environment meets the requirement of the device. The operating
temperature shall be between -30°C to 50°C (-22°F to 122°F), and humidity shall be from 5% to
95%.
DO NOT expose the device to high electromagnetic radiation or dusty environments.
DO NOT aim the lens at the sun or any other bright light.
Place the device in a dry and well-ventilated environment.
When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power
cable, and contact the service center.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various
countries or regions, including without limitation, the United States, European Union, United
Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local government authorities for any necessary export
license requirements if you intend to transfer, export, re-export the thermal series products
between different countries.