User's Manual

Thermal Image Scope User Manual
28
Chapter 10 Maintenance
This part introduces the operation of checking device information, upgrading device, restoring to
defaults, etc.
10.1 View Device Information
Steps
1. Hold to go to the menu.
2. Press or to select (Setting), and press to enter the setting interface.
3. Press or to select (Version), and press to view the device information.
4. Hold to exit.
10.2 Format eMMC
Before You Start
Confirm the important media file is properly kept a backup before use.
Steps
1. Hold to go to the menu.
2. Press or to select (Format), and press to enter the setting interface.
3. Press or to select Yes.
4. Hold to format eMMC.
Note
When formatting succeeds, the image freezes for 1 second and a prompt shows on the display.
10.3 Upgrade Device
Before You Start
● Please get the upgrade package (including Main Firmware and FPGA Firmware) first.
● Make sure the hotspot function is disabled.
● Turn on the device after connecting it to your PC, and keep the device on for 10 to 15 seconds
before other operations.