User's Manual

Thermal Image Scope User Manual
27
Chapter 9 Video Output
The video output is used to view the device image on the display unit for details.
Before You Start
Connect the device to the display unit via CVBS interface of the aviation plug.
Steps
1. Hold to go to the menu.
2. Press or to select (Setting), and press to enter the setting interface.
3. Press or to select (Video Output) to enter the configuration interface.
4. Press or to select ON to enable CVBS.
5. Hold to save settings and exit.
Note
The CVBS cable is not included in the package, please purchase it by yourself.