User's Manual

Thermal Image Scope User Manual
22
Chapter 5 Measure Distance
The device can measure the distance between the target and the observation position.
Before You Start
When measuring the distance, keep the hand and the position steady. Otherwise, the accuracy
may be affected.
Steps
1. Press and to enter the distance measurement interface.
2. Press to enter target setting interface to set the parameters for the target.
1) Press or to select the target from Deer, Grey Wolf, Brown Bear, and Custom,
and press to confirm.
2) Press or to set target height, and press to confirm.
3) Hold to save settings and return to the distance measurement interface.
3. Align the center of top scale line with the edge of target top, and press to confirm, then
the top scale line flashes 3 times
4. Align the center of bottom scale line with the edge of target bottom, press to confirm,
then the bottom scale line flashes 3 times
Result
The left top of the image displays the distance measurement result and the height of the target.
The results last for 5 seconds and return to live view interface.
Figure 7-1 Measurement Result