User's Manual

Thermal Image Scope User Manual
20
Figure 6-1 Crosshair Settings
3. Set crosshair type.
1) In the crosshair setting interface, press or to select Crosshair Type.
2) Press to select crosshair type. 7 types of crosshairs can be selected.
4. Set the crosshair color.
1) In the crosshair setting interface, press or to select Color.
2) Press to switch the color of the crosshair. White, Green, Red, Black, Yellow, and
Purple are selectable.
5. Set the crosshair position.
1) In the crosshair setting interface, press or to select Calibration.
2) Press or to switch the X and Y axis and press to confirm.
3) Press or to move the crosshair until it reaches the target position. The small
crosshair indicates the initial position of the crosshair.
4) Press to confirm.
6. (Optional) When enabling the freeze function in the crosshair interface, you can adjust the
position of the cursor on a frozen image. This function can prevent image flutter.
1) In the crosshair setting interface, press or to select Freeze.
2) Press or to switch the X and Y axis and press to confirm.
3) Press or to move the crosshair until it reaches the target position. The small
crosshair indicates the initial position of the crosshair.
4) Press to confirm.
Note
When you switch the crosshair type, a prompt will appear on the interface. Select OK to save
the parameters for the current crosshair.
5)