User's Manual

Thermal Image Scope User Manual
18
Note
● When crosshair is enabled, the PIP view is the detail of crosshair. When crosshair is not
enabled, the PIP view is the detail of central part.
● If digital zoom is enabled, the PIP view also zooms. If the digital zoom ratio reaches 16, the
PIP does not zoom.
3.10 Adjust Digital Zoom
You can zoom the image by using this function.
Press in the live view interface, the live view switches between 1×, 2×, 4×, 8×, and 16×.
3.11 Synchronize Time
Steps
1. Hold to go to the menu.
2. Press or to select (Setting), and press to enter the setting interface.
3. Press or to select (Time Settings), and press enter the time setting
interface.
4. Press or to switch time setting options, and the setting description is shown as
follows:
Table 3-1 Time Setting Description
Setting Type Setting Description
Time Display Setting
Press to enable/disable time display on the top right of the
interface.
Time Setting
Press to switch the hour, minute, or second to be synchronized,
and press or to change the hour, minute, or second
selected.
Date Setting
Press to switch the year, month, or day to be synchronized, and
press or to change the year, month, or day selected.
4. Hold to save settings and exit.