User's Manual

Thermal Image Scope User Manual
17
Figure 3-10 DPC
● DPC is only supported in the white hot mode.
3.8 Flat Field Correction
This function can correct non-uniformity of display.
Steps
1. Hold to go to the menu.
2. Press or to select (FFC), and press to confirm.
3. Press or to switch the FFC mode.
– Manual FFC: In the live view interface, hold to correct the non-uniformity of display.
– Auto FFC: The device performs FFC automatically according to the set schedule when the
device is turned on.
– External FFC: Cover the lens cover, hold to correct the non-uniformity of display.
3. Hold to save settings and exit.
3.9 Set PIP
In the live view interface, the PIP image is displayed at the up-center of the live view.
Steps
1. Press to go to the shortcut menu.
2. Press or to select (PIP)
3. Press or to select whether to enable or disable PIP.
4. Hold to save settings and exit.
Figure 3-11 Set PIP Mode