User's Manual

Thermal Image Scope User Manual
16
Figure 3-9 Color Two Mode
3.7 Correct Defective Pixel
The device can correct the defective pixels on the screen.
Steps
1. Hold to go to the menu.
2. Press or to select (DPC), and press to enter DPC setting interface.
3. In the DPC Interface, press to select Axis, and press to switch the moving direction
of the cursor.
4. Press or to move the cursor until it reaches the defective pixel, and press to
select Axis to N.
5. Press or select DPC, and press to correct the defective pixel.
6. Hold to exit.
Note
● The selected defective pixel can be magnified and displayed at the bottom right of the
interface.