User's Manual

Thermal Image Scope User Manual
13
2. Press or to select (Contrast) and press to enter the setting interface.
3. Press or to adjust image contrast.
4. Hold to save settings and exit.
3.5 Select Scene
You can select proper scene mode according to actual using scene to improve the display effect.
Steps
1. Press to go to the shortcut menu.
2. Press or to select Scene Mode and press to enter the setting interface.
3. Press or to switch scene mode.
– refers to city mode.
– refers to jungle mode.
– refers to stone mode.
– refers to sky mode.
4. Hold to save settings and exit.
3.6 Set Palettes
You can select different palettes to display the same scene in different effects.
Steps
1. Press to go to the shortcut menu.
2. Press or to select (Palettes) and press to enter the setting interface.
3. Press or to switch palettes.
4. Hold to save settings and exit.
White Hot
The hot part is light-colored in view. The higher the temperature is, the lighter the color is.