User's Manual

Thermal Image Scope User Manual
12
Figure 3-2 Adjust Focus
Note
When focusing, do not touch the surface of lens to avoid smearing the lens.
3.3 Adjust Brightness
In white hot mode, the higher the value of brightness is, the brighter the image is. The image
effect in white hot mode is showed as picture below and effect in black hot mode is opposite.
Steps
1. Press to go to the shortcut menu.
2. Press or to select (Brightness) and press to enter the setting interface.
3. Press or to adjust brightness.
4. Hold to save settings and exit.
Figure 3-3 Adjust Brightness in White Hot Mode
3.4 Adjust Contrast
Steps
1. Press to go to the shortcut menu.