User's Manual

Thermal Image Scope User Manual
7
Take the batteries away if the device is not used for a long time.
2.3 Install Rail
Before You Start
● Turn off the device first.
● Use the Non-dust cloth to clean the device base and the rail.
Steps
1. Install the device to the rail as the arrow shows.
2. Insert the screws, and tighten them.
Figure 2-5 Install Rail and Tighten Screws
3. Tighten the knobs to secure the device.
Figure 2-6 Tighten Knobs
4. Insert and tighten the screws to fix the expansion rail.