User's Manual

Thermal Image Scope User Manual
5
Chapter 2 Preparation
2.1 Cable Connection
Connect the device and power adaptor with a type-C cable to charge the device. Alternatively,
connect the device and PC to export files.
Figure 2-1 Cable Connection
2.2 Install Battery
Insert the batteries into the battery compartment.
Before You Start
● The device supports 3.0 V or 3.7 V battery.
● Select the correct battery voltage in the device menu after you install the battery, or it may
cause device exception. The default battery voltage is 3.0 V.
Steps
1. Turn the battery cover anticlockwise to loosen it.