User's Manual

Thermal Image Scope User Manual
3
2 Focus Ring Adjust the focal length.
3
Expansion Rail
Hole
Install the expansion rail.
4
Battery
Compartment
Install the device battery in it.
5 Eyepiece View the target.
6
Diopter
Adjustment Ring
Adjust the dioptric correction.
7
Data Exchange
Interface
Charge the device and transmit data.
8 & 9 Rail Interface Install the rail.
1.3.2 Button
Figure 1-2 Buttons on Device
Table 1-2 Description of Buttons
No. Icon Button Description
1 Power
● Press: Standby mode/wake up device
● Hold: Power on/off
2 Up
● Press: Select parameters/switch digital zoom
● Hold: Select parameters/FFC
3 Menu
● Press: Enter shortcut menu
● Hold: Enter/exit menu