Product Manual

6. Connection
1
）
The monitor can be powered by a cigarette lighter.
Connect the positive of the cigarette lighter to the red wire and the
ground or negative to the black wire.
（
Before installing, make sure
you connect the power cable and antenna to the camera
）
Step 1 - Step 3
Step 1: Choose the camera location.
Step 2: Drill a 12mm Diameter cable hole and secure the camera with two
screws.(Package contents include screws)
Step 3: Locate the reversing lights or running lights wiring on your vehicle.
Connect the red wire to the positive and the white wire to the ground or negative.
2) The monitor can be powered by ACC/Fuse/Radio etc.
Red wire is connected to positive pole, white wire to ground