Product Manual

Tips
：
Test to make sure that your surroundings appear/display on the
monitor screen! Once you have confirmed the monitor works, you
are ready to install it.
If there is no image after you have installed the unit, check your
connections to the power source. PLEASE NOTE: if you reverse the
positive wire and negative wire, it will damage the camera so be
cautious. If you cannot verify which wire is positive, connect the
white wire to
“
ground
”
it (attach it to a metal part on vehicle) and
then test the positive wire. Grounding it will protect the camera.
Generally, the black wire of the tail lights to positive, the green wire
of the tail light to negative.
Note : Don’t cut off the DC connector on the camera, it may damage
the camera.