Product Manual

1) Please notice below data of power supply input to the monitor and
camera.
Monitor: voltage range 10V-35V >= 800mA
Camera and Transmitter: 10V-36V >=800mA
Note
：
If the power is over 36V to camera, it will cause the damage.
We recommend DC 12V to the monitor and camera.
2) Before installation, you must test the device. Please reference the
image below.
A. Wiring 2 power cords to camera and monitor.
B. Loose the screws on green adapter, then insert the red
wire(copper wire) to Positive (+) slot, while the black wire(copper
wire) to Negative (-) slot.
C. Plug cigarette lighter and turn on the red switch. If you see
images on monitor, it means the system works well.