Product Manual

(The adjustment steps of the other camera are the same as this
CAM1)
Notice: the last row of icons indicate the function is an automatic
jump setting between 4 camera screens and jump time setting. When
the last icon is on, it will automatically jump from the CAM1 screen
to the CAM4 in the single screen.
6
）
SYSTEM
（
Six icon
）
In this mode, you can adjust some data for time/language/NTSC and
PAL switching/Reversing auxiliary line etc. The reversing guide lines
will only appear in a single screen, at the same time its reversing
guide line can be turned off or on.
Touch OK key to enter the system mode, then you can adjust some
data for time/language/NTSC and PAL and turn on/off the Guide
lines. You touch the Up and Down key to select one function. Then
touch the SEL button to enter the selected function for adjustment.
Also the guide lines could be on/off by up and down key. After touch
the Menu key to quit the mode, the changes would be saved.