Product Manual

3): Down: Touch it to Minus
4): CH-: Touch to switch Channels
5): Menu: Touch this to enter the menu mode
6): OK: Touch to confirm/Select/Open and close the Recording
7): V: Touch it turn on/off guide lines
Note: when entering the "Menu" mode, the Up and down key only
plus and minus the data in the menu.
10. Product function introduction
(1) PAIRING
（
First icon
）
(The system does not need to pair signals when you have received,
because it has already been paired. You just need to pair with the
monitor when connecting new cameras.)
Step 1 - Step 3
Step 1: Touch the below image Red Mark button( Menu button) to
enter menu mode (touch it once). In the menu, the first icon is the
Pairing.
（
Before operation, make sure you connect the power cable
and antenna to the camera
）