Operation Manual

Continuing printing
☆ This function is only applicable to the continuing of printing after suspending printing in
condition of continuous power on.
1. Press the control knob, and the operation menu pops up on the display screen;
2. Rotate the knob, and move the choice box to “continuing printing”, and press the knob to
continue printing;
Stopping printing
☆ It is not available to continue printing after stopping printing, and please be cautious
when using this function.
1. During the printing process, press the control knob, and the control menu pops up on the
display screen;
2. Rotate the knob, and move the choice box to “stopping printing”, and press the knob to stop
printing, and it is impossible to continue printing after stopping printing.
Return of material and reloading
This printer is equipped with the function of automatic return of material, which can be utilized in
condition that the consumable is to be used up or it is necessary to change to different colors.
1. In the condition of normal display of main interface, press the control knob, and the main
menu pops up on the display screen;
2. Rotate the knob, and move the choice box to “heating to replace the consumable”, and press