Operation Manual

and the temperature on the extrusion head falls, and the operation is finished.
End cap dredging
High quality printing consumables are selected for this printer, and this function is not needed in
normal conditions. If you select other consumables, the sprayer nozzle may be blocked due to
impurities in the material or other reasons, in which condition this function can be utilized.
1. Press the control knob in the condition of normal display of the main interface, press the
control knob, and the main menu pops up on the display screen;
2. Rotate the knob, and move the choice box to “heating the printing head”, and press the knob to
enter into the operation;
3. “In processing, and please wait” appears on the interface; at this time, the printer is heating
the sprayer, and please wait patiently;