User's Manual
PAGE 5
Setup & use (continued)
TO USE PLUGGED-IN
Step 1: Place the monitors in the rooms from which you want to monitor your baby (ie., living room
or bedroom). Plug the monitor AC adapters into the AC adapter jacks and other ends into
standard electrical outlets.
Step 2: Press and hold POWER/MENU buon for 5-seconds to power up unl the AXVUE logo or
video appears on screen.
Step 3: For audio and no video, press the VIDEO ON/OFF buon top of the unit.
Step 4: To turn the monitor off completely, press and hold the POWER/MENU buon for 5-seconds.
TO USE PORTABLE / BATTERY MODE
Step 1: Charge the baery for 4 hours at least, before using the monitor in portable mode.
Step 2: Make sure the monitor adapter is plugged into the monitor, camera adapter is plugged into
the camera, as they are shown on the body.
Step 3: The baery life can be up to 6-hours if charged overnight.
Before using the monitor, charge the baery for 6-8 hours.
TO PAIR MONITOR AND CAMERA ( ADD A CAMERA )
Step 1: Make sure the monitor is at the same area as the camera.
Step 2: Keep the camera powered off.
Step 3: Press Power/VIDEO buon for 5 second to power on the monitor. Then press
OK/Menu buon , highlight camera opon by using Left/Temperature mode or
Right/Zoom In buon, press the OK/menu buon to enter the camera opons menu
which is show as below . Select ADD CAM icon , press OK/menu buon to camera list, select
an availabe number and press OK/menu buon to start pairing, the red LED will flash and
wireless connecng icon is shown.
Step 4: Power on the camera within 8 seconds.
Step 5: Wait 3 seconds, the red LED will stop flashing once paired successfully, and video will appear.
The monitor and the camera are paired prior to the shipment. If the monitor
and camera are found not paired for some reason, follow steps below:
Baery life will be weaken if recharging constantly. Charge the baery aer the indicator is shown.
Remove baery if long me of non-use, or exhausted.
ON
OFF
1 2 3 4
Press 5 second
to power on.
Red LED will flash